With their maximum working temperature of up to 300 °C and forced air circulation, the TR range of ovens achieve a very good temperature uniformity. They can be used for various applications such as drying, sterilizing or warm storing.

Features of the range:

• Short delivery times are insured for standard models.
• Working temperature range: + 20 °C above room temperature up to 300 °C
• Ovens TR 30 - TR 420 designed as tabletop models
• Ovens TR 450 - TR 1050 designed as floor standing models
• Horizontal forced air circulation results in temperature uniformity according to DIN 17052-1 better than +/− 5 °C in the empty oven (with closed exhaust air flap)
• Stainless steel furnace housing, material no. 1.4016 (DIN)
• Stainless steel chamber, alloy 304 (AISI)/(DIN material no. 1.4301), rust resistant and easy to clean
• Large, wide-opening swing door, hinged on the right with quick release for models TR 30 - TR 240 and TR 450
• Double swing door with quick release for models TR 420, TR 800 and TR 1050
• Ovens TR 800 and TR 1050 equipped with transport castors
• Adjustable exhaust at the rear wall with operation from the front
• PID microprocessor control with self-diagnosis system
• Safety technology according to EN 1539 for charges containing liquid solvents, achievable temperature uniformity +/− 8 °C according to DIN 17052-1 in the empty oven (with closed exhaust air flap
• Comes standard with R7 controller

Customisable - these features can be added on request

• Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the oven and load
• Range of controller options available
• Fan speed of the air circulation fan can be reduced to meet your requirements
• Window for charge observing
• Further removeable grids with rails
• Side inlet
• Electrical rotary device (associated sample holder will be individually adapted to the charge)
• Exhaust air duct
• Transport castors for models TR 240 - TR 450
• Upgrading available to meet the quality requirements of AMS2750F or FDA

*This is designed to be a representation of the features available for this range. For more technical information and information on additional equipment please consult the brochure and reach out for a quote. This furnace features no safety technology for processes which produce combustible mixtures, for example debinding. If the furnace is still used for such processes despite this fact, the concentration of organic gas mixtures in the furnace must never exceed 3% of the lower explosion limit (LEL). This pre-requisite applies not only to normal operation but, in particular, to exceptional situations such as process disruptions (caused, for example, by the failure of a power unit). You must ensure that the furnace is adequately ventilated and vented. *