The RD 30/200/11 tube furnace impresses with its very good price-performance ratio, particularly compact external dimensions and its low weight. This all-rounder is equipped with a working tube, which also serves as support for the heating wires. The working tube is therefore part of the furnace heating, with the advantage that the tube furnace reaches very high heating speeds. The furnace is designed for horizontal use up to 1100 °C.

Standard configuration:

• Tmax 1100 °C
• Inner diameter of the tube: 30 mm, heated length: 200 mm
• Ceramic working tube C 530 including two fiber plugs for operation under air
• Thermocouple type K (1100 °C)
• Heating wires wound directly around the working tube resulting in very fast heatup rates
• Controller R7, alternative controllers available

• Additional equipment:
• Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the oven and load
• Gas supply system 1 for non-flammable protective or reactive gas - consult the brochure for more information (pg58)

*This is designed to be a representation of the features available for this range. For more technical information and information on additional equipment please consult the brochure and reach out for a quote. This furnace features no safety technology for processes which produce combustible mixtures, for example debinding. If the furnace is still used for such processes despite this fact, the concentration of organic gas mixtures in the furnace must never exceed 3% of the lower explosion limit (LEL). This pre-requisite applies not only to normal operation but, in particular, to exceptional situations such as process disruptions (caused, for example, by the failure of a power unit). You must ensure that the furnace is adequately ventilated and vented. *