Chromolith Flash RP-18e 25-2

Code: 1520140001 D2-231

Non disponible en dehors du Royaume-Uni et de l'Irlande

Analysis Note

Pressure: ≤ 20 barPerformance (anthracene)Theoretical Plates (N/m) (Anthracene): ≥ 70000Capacity factor (Anthracene): 3.3 - 4.3Tailing (USP): 0.90 - 1....


en savoir plus

Votre prix
$649.60 EACH
$779.52 inc. VAT

Non disponible en dehors du Royaume-Uni et de l'Irlande

Analysis Note

Pressure: ≤ 20 barPerformance (anthracene)Theoretical Plates (N/m) (Anthracene): ≥ 70000Capacity factor (Anthracene): 3.3 - 4.3Tailing (USP): 0.90 - 1.40 %separation factor (anthracene/progesterone): 2.2 - 2.6

General description

Chromolith® columns are made of monolithic silica with a characteristic bimodal pore structure. Chromolith® Flash RP-18 endcapped 25-2 columns have macropores with 1.5 μm diameter, giving a column efficiency exceeding 100,000 plates/meter. The mesopores are 13 nm (130 Å), the surface modification is octadecylsilane with full end-capping. Chromolith® Flash RP-18 endcapped 25-2 columns fall under the USP L1 Classification. The column efficiency is comparable to a 3-4 μm particle size fully porous particulate column. Chromolith® Flash RP-18 endcapped 25-2 columns are perfectly suitable for LC-MS applications.The column dimension of 25 mm length and 2 mm I.D. is the best choice for rapid separations on any U/HPLC System.The revolutionary, monolithic silica with its unique combination of macropores and mesopores enables:—Rapid separations at very low column back-pressure—High matrix tolerance, allowing time and cost savings with simplified workflows—Cost-savings due to extended column lifetimes—Connection of columns, flow gradients and the use of mobile phases with higher viscosityThe recommended Guard-columns are: Chromolith® RP-18 endcapped 5-2 guard cartridges (3 pieces) 'javascript:OpenWin(' /product/mm/152009'>1.52009] with the Chromolith® Guard Cartridge Holder (kit) 5 mm x 2 mm [1.52004]The Chromolith® column coupler can be used to significantly increase the separation efficiency of Chromolith® columns by coupling several columns in series (up to 100,000 plates/per column). [1.51467]Learn more:Brochure: Race through your Separations on Any System. Chromolith® Monolithic Silica HPLC ColumnsAll Supelco HPLC Columns, including monolithic Chromolith® columns, are fully compatible to all HPLC and UHPLC Instruments.Supelco HPLC Products: The Best Choice for Any LC Instrument

Legal Information

Chromolith is a registered trademark of Merck KGaA, Darmstadt, Germany

Packaging

1 ea in Fibre case

agencysuitable for USP L1
column L × I.D.2.5 cm × 2 mm
extent of labeling18% Carbon loading
featureendcapped
materialPEEK column
matrix active groupC18 bonding phase
matrixmonolithic silica
operating pH range2-7.5
packaging1 ea of
parameter45 °C max. temp., 200 bar pressure
pore size13 nm mesoporosity, 1.5 µm macroporosity
product lineChromolith®
Quality Level100
separation techniquereversed phase
storage temp.no temp limit
surface area300 m2/g
technique(s)mass spectrometry (MS): suitable (High), UHPLC-MS: suitable, HPLC: suitable, LC/MS: suitable, UHPLC: suitable
Ce produit répond aux critères suivants: