Chromolith Flash RP-18e 25-3

Code: 1520030001 D2-231

Non disponible en dehors du Royaume-Uni et de l'Irlande

Analysis Note

Appearance: passes testPressure: ≤ 10 barPerformance (anthracene)Theoretical Plates (N/m) (Anthracene): ≥ 80000Capacity factor (Anthracene): 3.3 - 4...


en savoir plus

Votre prix
£524.00 EACH
£628.80 inc. VAT

Non disponible en dehors du Royaume-Uni et de l'Irlande

Analysis Note

Appearance: passes testPressure: ≤ 10 barPerformance (anthracene)Theoretical Plates (N/m) (Anthracene): ≥ 80000Capacity factor (Anthracene): 3.3 - 4.3Tailing (USP): 0.90 - 1.55 %

General description

Chromolith® columns are made of monolithic silica with a characteristic bimodal pore structure. Chromolith® Flash RP-18 endcapped 25-3 columns have macropores with 2 µm diameter, giving a column efficiency exceeding 80,000 plates/meter. The mesopores are 13 nm (130 Å), the surface modification is octadecylsilane with full end-capping. Chromolith® Flash RP-18 endcapped 25-3 columns fall under the USP L1 Classification. The column efficiency is comparable to a 5 µm particle size fully porous particulate column. Chromolith® Flash RP-18 endcapped 25-3 columns are perfectly suitable for LC-MS applications.The column dimension of 25 mm length and 3 mm I.D. is the best choice for rapid separations on any HPLC and UHPLC System.The revolutionary, monolithic silica with its unique combination of macropores and mesopores enables:—Rapid separations at very low column back-pressure—High matrix tolerance, allowing time and cost savings with simplified workflows—Cost-savings due to extended column lifetimes—Connection of columns, flow gradients and the use of mobile phases with higher viscosityThe recommended Guard-columns are: Chromolith® RP-18 endcapped 5-3 guard cartridges (3 pieces) [1.52005] with the Chromolith® Guard Cartridge Holder 5 mm x 3 mm [1.52004]Holder and guard cartridges are also available as Guard cartridge set [1.52008]The Chromolith® column coupler can be used to significantly increase the separation efficiency of Chromolith® columns by coupling several columns in series (up to 100,000 plates/per column). [1.51467]Learn more:Brochure: Race through your Separations on Any System. Chromolith® Monolithic Silica HPLC ColumnsAll Supelco HPLC Columns, including monolithic Chromolith® columns, are fully compatible to all HPLC and UHPLC Instruments.Supelco HPLC Products: The Best Choice for Any LC Instrument

Legal Information

Chromolith is a registered trademark of Merck KGaA, Darmstadt, Germany

Packaging

1 unit in Fibre case

agencysuitable for USP L1
column L × I.D.2.5 cm × 3 mm
extent of labeling18% Carbon loading
featureendcapped
materialPEEK column
matrix active groupC18 bonding phase
matrixmonolithic silica
operating pH range2-7.5
packaging1 ea of
parameter45 °C max. temp., 200 bar pressure
pore size2 µm macroporosity, 13 nm mesoporosity
product lineChromolith®
Quality Level100
separation techniquereversed phase
storage temp.no temp limit
surface area300 m2/g
technique(s)mass spectrometry (MS): suitable (High), HPLC: suitable, LC/MS: suitable
Ce produit répond aux critères suivants: