Chromolith Flash RP-18e 25-4.6

Code: 1514630001 D2-231

Non disponible en dehors du Royaume-Uni et de l'Irlande

Analysis Note

Carbon content: 17.0 - 18.6 %Pressure: ≤ 10 barstability testing: passes testPerformance (anthracene)Theoretical Plates (N/m) (Anthracene): ≥ 80000C...


en savoir plus

Votre prix
$627.85 EACH
$753.42 inc. VAT

Non disponible en dehors du Royaume-Uni et de l'Irlande

Analysis Note

Carbon content: 17.0 - 18.6 %Pressure: ≤ 10 barstability testing: passes testPerformance (anthracene)Theoretical Plates (N/m) (Anthracene): ≥ 80000Capacity factor (Anthracene): 3.0 - 4.0Tailing (USP): 0.90 - 1.55 %

General description

Chromolith® columns are made of monolithic silica with a characteristic bimodal pore structure. Chromolith® Flash RP-18 endcapped columns have macropores with 2 µm diameter, giving a column efficiency exceeding 80,000 plates/meter. The mesopores are 13 nm (130 Å), the surface modification is octadecylsilane with full end-capping. Chromolith® Flash RP-18 endcapped columns fall under the USP L1 Classification. The column efficiency is comparable to a 5 µm particle size fully porous particulate column. Chromolith® Flash RP-18 endcapped columns are perfectly suitable for LC-MS applications.The column dimension of 25 mm length and 4.6 mm I.D. is the best choice for very rapid separations on any HPLC System.The revolutionary, monolithic silica with its unique combination of macropores and mesopores enables:—Rapid separations at very low column back-pressure—High matrix tolerance, allowing time and cost savings with simplified workflows—Cost-savings due to extended column lifetimes—Connection of columns, flow gradients and the use of mobile phases with higher viscosityThe recommended Guard-columns are: Chromolith® RP-18 endcapped 5-4.6 guard cartridges (3 pieces) [1.51452] with the Chromolith® Guard Cartridge Holder 5 mm x 4.6 mm [1.52032]OrChromolith® RP-18 endcapped 10-4.6 guard cartridges (3 pieces) [1.51451] with the Chromolith® Guard Cartridge Holder 10 mm x 4.6 mm [1.52033]The Chromolith® column coupler can be used to significantly increase the separation efficiency of Chromolith® columns by coupling several columns in series (up to 100,000 plates/per column). [1.51467]Need more efficiency? Chromolith® HighResolution RP-18 endcapped 25-4.6 HPLC columns [1.52020] provide a column efficiency exceeding 140,000 plates/meter.Learn more:Brochure: Race through your Separations on Any System. Chromolith® Monolithic Silica HPLC ColumnsAll Supelco HPLC Columns, including monolithic Chromolith® columns, are fully compatible to all HPLC and UHPLC Instruments.Supelco HPLC Products: The Best Choice for Any LC Instrument

Legal Information

Chromolith is a registered trademark of Merck KGaA, Darmstadt, Germany

Packaging

1 unit in Fibre case

agencysuitable for USP L1
column L × I.D.2.5 cm × 4.6 mm
extent of labeling18% Carbon loading
featureendcapped
materialPEEK column
matrix active groupC18 bonding phase
matrixmonolithic silica
operating pH range2-7.5
packaging1 ea of
parameter45 °C max. temp., 200 bar pressure
pore size2 µm macroporosity, 13 nm mesoporosity
product lineChromolith®
Quality Level100
separation techniquereversed phase
storage temp.no temp limit
surface area300 m2/g
technique(s)mass spectrometry (MS): suitable (High), HPLC: suitable, LC/MS: suitable
Ce produit répond aux critères suivants: