Betafluor is a pre-mixed scintillation solution designed to count virtually all non-aqueous and organic samples with greatly improved efficiencies. Betafluor contains all necessary primary and secondary fluors and solvents. It is precisely quality controlled to assure lot-to-lot consistency and reproducibility of results. Simply combine the non-aqueous sample with 10-15 ml Betafluor, shake well and count.

Betafluor has lower backgrounds and improved quench resistance over toluene-based scintillators, and tritium efficiencies over 55% are obtainable. Betafluor is formulated with our exclusive high flash point, low evaporation rate LSC solvent which offers higher counting efficiencies as well as reduced fire hazard and exposure to aromatic solvents.

Storage: Betafluor is best stored tightly capped in a cool dry area. No deterioration has been observed on storage for five years at room temperature or heating to 50oC for one week or cooling to -30oC for one week. Flash point 114oF (TCC). Shipping weight 12 lbs. (1x1 gal.), 49 lbs. (4x1 gal.).

• Organic Samples
• Traditional Cocktail
• Holds Wide Range of Organics
• 55% Tritium Efficiency

Keep in a tightly closed container, stored in a cooled, dry, ventilated area away from sources of heat or ignition. Protect from physical damage. Isolate from incompatible materials. Avoid contact and inhalation. Do not get in eyes, on skin, on clothing. Wash thoroughly after handling. Transfer methods should avoid static sparks. Use explosion proof ventilation.