Not available outside of the UK & Ireland.

Application

Flexmark 9 TPU 3D Printing Parameters Extruder (nozzle) temperature: 225 +/-10 °C Bed temperature: cold to 45 °C Print speed: 25-35 mm/s Fan: 0-50 % Minimum nozzle diameter: 0.3 mm Plate materials: glass, blue tape, kapton tape, etc.

General description

TPU Flexible 3D Printing Filament TPUs are highly resistant to chemical agents, wear-proof and have good elastic comeback. Flexmark 7 = 70 Shore A, the most flexible, but it requires a precise calibration of the printer. Flexmark 8 = 80 Shore A, a good mixture of flexibility and stiffness and easier to print. Flexmark 9 = 90 Shore A, the stiffest of all the Flexs and lets you print as usual.Material Properties Density: 1.24 g/cm3 Hardness: 93 sh/A Elongation at break: 600% Tensile strain: 55 MPa Compression set at 70 °C: 45% Charpy Impact at 23 °C: No break Charpy Impact at -30 °C: No break Abrasion loss: 30 mm3