Chromolith WP RP-8 100-4.6 1 UNIT

Code: 1522650001 D2-231

Not available outside of the UK & Ireland.

General description

Biotherapeutics, for example, bio-engineered drugs and peptide therapeutics, represent the promise of new medical treatments for the future. Production co...


read more

Your Price
$1,268.75 EACH
$1,522.50 inc. VAT

Not available outside of the UK & Ireland.

General description

Biotherapeutics, for example, bio-engineered drugs and peptide therapeutics, represent the promise of new medical treatments for the future. Production costs have been falling leading to extremely high demand for suitable analytical methods for process monitoring and quality control of these biomolecules. HPLC is the preferred method of analysis, and it is therefore important to use the right column for these larger molecules. Accurate analysis of proteins, antibodies, and large peptides requires columns with good permeability, along with better mass transfer and selectivity. In order for size-exclusion not to influence the separation, the pore size should be approximately ten times larger than the molecule being analyzed. Chromolith columns have shown great potential and superiority in comparison to standard silica. Chromolith® WP 300 columns are made of monolithic silica with a characteristic bimodal pore structure. Chromolith® WP 300 RP-8 columns have macropores with 2 µm diameter, giving a column efficiency exceeding 80,000 plates/meter. The mesopores are 30 nm (300 Å), the surface modification is Octylsilane. Chromolith® WP 300 RP-8 columns fall under the USP L7 Classification. The column efficiency is comparable to a 5 µm particle size fully porous particulate column. Chromolith® WP 300 RP-8 columns are suitable for LC-MS applications. The column dimension of 100 mm in length and 4.6 mm I.D. is the best choice for fast separations of Biomolecules on any HPLC System.Chromolith® WP 300 RP-8 100-4.6 HPLC columns enable: Completely bioinert column hardware and high biorecovery High-speed separations at very low column back-pressure High matrix tolerance, allowing time and cost savings with simplified workflows Cost-savings due to extended column lifetimes Connection of columns, flow gradients and the use of mobile phases with higher viscosityThe recommended Guard-columns are: Chromolith® WP 300 RP-8 5-4.6 guard cartridges (3 pieces) [1.52268] with the Chromolith® Guard Cartridge Holder Bioinert 5 mm x 4.6 mm [1.52255] Or Chromolith® WP 300 RP-8 10-4.6 guard cartridges (3 pieces) [1.52267] with the Chromolith® Guard Cartridge Holder Bioinert 10 mm x 4.6 mm [1.52256] The Chromolith® column coupler can be used to significantly increase the separation efficiency of Chromolith® columns by coupling several columns in series. [1.51467] Learn more: Brochure: Race through your Separations on Any System. Chromolith® Monolithic Silica HPLC Columns. All Supelco HPLC Columns, including monolithic Chromolith® columns, are fully compatible to all HPLC and UHPLC Instruments. Supelco HPLC Products: The Best Choice for Any LC Instrument

Legal Information

Chromolith is a registered trademark of Merck KGaA, Darmstadt, Germany

Packaging

1 unit in Fibre case

agencysuitable for USP L7
column L × I.D.10 cm × 4.6 mm
extent of labeling4-5% Carbon loading
featureendcapped: no
materialPEEK column
matrix active groupC8 bonding phase
matrixmonolithic silica
operating pH range1.5-7.5
packaging1 ea of
parameter200 bar pressure, 60 °C max. temp.
pore size2 µm macroporosity, 30 nm mesoporosity
product lineChromolith®
Quality Level100
separation techniquereversed phase
storage temp.no temp limit
surface area120 m2/g
technique(s)mass spectrometry (MS): suitable (High), HPLC: suitable, LC/MS: suitable
This product has met the following criteria: