Chromolith HR RP-18e 100-4.6

Code: 1520220001 D2-231

Not available outside of the UK & Ireland.

Analysis Note

Appearance: passes testPressure: 40 - 70 barstability testing: passes testPerformance (anthracene)Theoretical Plates (N/m) (Anthracene): ≥ 140000Capacity ...


read more

Your Price
£875.00 EACH
£1,050.00 inc. VAT

Not available outside of the UK & Ireland.

Analysis Note

Appearance: passes testPressure: 40 - 70 barstability testing: passes testPerformance (anthracene)Theoretical Plates (N/m) (Anthracene): ≥ 140000Capacity factor (Anthracene): 3.9 - 4.6Tailing (USP): 0.90 - 1.30 %Selectivityseparation factor (anthracene/progesterone): 1.95 - 2.35

General description

Chromolith® columns are made of monolithic silica with a characteristic bimodal pore structure. Chromolith® HighResolution RP-18 endcapped columns have macropores with 1.15 µm diameter, giving a column efficiency exceeding 140,000 plates/meter. The mesopores are 15 nm (150 Å), the surface modification is octadecylsilane with full end-capping. Chromolith® HighResolution RP-18 endcapped columns fall under the USP L1 Classification. The column efficiency is comparable to a 2.7 to 3 µm particle size fully porous particulate column. Chromolith® HighResolution RP-18 endcapped columns are perfectly suitable for LC-MS applications.The column dimension of 100 mm length and 4.6 mm I.D. is the best choice for high resolution separations of complex compound mixtures on any HPLC System.The revolutionary, monolithic silica with its unique combination of macropores and mesopores enables:—Rapid separations at very low column back-pressure—High matrix tolerance, allowing time and cost savings with simplified workflows—Cost-savings due to extended column lifetimes—Connection of columns, flow gradients and the use of mobile phases with higher viscosityThe recommended Guard-columns are: Chromolith® HighResolution RP-18 endcapped 5-4.6 guard cartridges (3 pieces) [1.52025] with the Chromolith® Guard Cartridge Holder 5 mm x 4.6 mm [1.52032]The Chromolith® column coupler can be used to significantly increase the separation efficiency of Chromolith® columns by coupling several columns in series (up to 100,000 plates/per column). [1.51467]Learn more:Brochure: Race through your Separations on Any System. Chromolith® Monolithic Silica HPLC ColumnsAll Supelco HPLC Columns, including monolithic Chromolith® columns, are fully compatible to all HPLC and UHPLC Instruments.Supelco HPLC Products: The Best Choice for Any LC InstrumentChromolith® HighResolution RP-18 endcapped columns are also available in 2 mm I.D. column dimension for perfect fit to UHPLC and UHPLC-MS needs. Flyer: UHPLC-like performance - Rapid and Robust at Low Pressure - Chromolith® HighResolution RP-18 endcapped 2 mm I.D. HPLC Columns

Legal Information

Chromolith is a registered trademark of Merck KGaA, Darmstadt, Germany

Packaging

1 unit in Fibre case

agencysuitable for USP L1
column L × I.D.10 cm × 4.6 mm
extent of labeling15% Carbon loading, 18% Carbon loading
featureendcapped
materialPEEK column
matrix active groupC18 bonding phase, C18 bonding phase, octadecylsilane (ODS)
matrixhighly porous, monolithic silica
operating pH range2-7.5
packaging1 ea of
parameter45 °C max. temp., 200 bar pressure, 50 °C max. temp.
pore size1.15 µm macroporosity, 1.5 µm macroporosity, 15 nm mesoporosity
product lineChromolith®
Quality Level100
separation techniquereversed phase
storage temp.no temp limit
surface area250 m2/g
technique(s)mass spectrometry (MS): suitable (High), HPLC: suitable, LC/MS: suitable
This product has met the following criteria: